This is a kit that can be fitted a mini bike, barstool and has been fitted to stationary engines. These are sand cast aluminum and hold 1.8 litres around 1/2 a gallon.They can be painted, powder coated or left the raw natural aluminum finish. . The tank is sold as a raw casting with the neck machined and 3 tapped 3/8 bsp holes in the bottom. Also am M6 fine thread fuel tap and tank fitting is supplied that can be fitted in any of the 3 drilled holes or you can fit your own if you require it to be in a different position. Also 2xM8 blind plugs are fitted to the tank for simple mounting with a strip of aluminum.
Length underside. 250mm
Width at widest point.150mm
Height at highest point.95mm
Height at lowest point.85mm
Mounting strap is not supplied due to different materials and widths of frames. Bolt size is M8 into the steel mounting plugs.
A simple strap is what we have used to mount tanks
The cap is fitted to may GM engines and replacement caps can be purchased worldwide. It is supplied in the 7 piece kit.
The cap cover simply pushes in with a small amount of adhesive.
This Kit contains
AS0446R raw tank
AS0117R raw cap cover
AS0447 Plastic fuel cap
2x blank tank mounting fittings
1x fuel tap adapter fitting
1x fuel tap